Alle Artikel · 6 Min. Lesezeit · focal basics

Critical process parameters in battery laser welding — and how to monitor them

Four parameters decide whether a battery welding process is stable. Here is what each one does, and how to verify it on the shop floor.

Critical process parameters in battery laser welding — and how to monitor them

Laser welding is taking on an increasingly important role in modern industry, and several trends are converging to push it there.

On the commercial side, growing demand generates supply. New manufacturers enter the market, competition for customers intensifies, and the result is greater availability of equipment along with acquisition and commissioning costs that become progressively more accessible.

On the technical side, advances in laser technology and competitive pressure between manufacturers are driving improvements in beam quality and the development of new products — dual-beam infrared lasers with high beam quality, green lasers, and blue lasers. Better beam quality opens up application areas that were previously closed: welding of very thin materials, and welding of materials considered difficult or impossible to join using conventional methods.

Lasers of this type are gaining ground quickly in battery manufacturing. Cost and technical optimisation requirements mean that materials with significantly different properties are frequently joined, at thicknesses in the range of 250–300 µm — copper, aluminium, and stainless steel.

The four parameters that decide process stability

In laser welding, a handful of fundamental parameters have a decisive impact on the stability of the production process:

  • Laser power
  • Welding speed
  • Laser beam focal position
  • Weld geometry

Laser power can be broken down further. In dual-beam systems, the inner beam (core) and the outer beam (ring) are configured separately, and for each beam it is possible to set power ramp-up, ramp-down, and so-called power scaling — a gradual reduction of laser power during the process.

Alongside these, a second group of factors is equally critical: material cleanliness, accurate targeting of the weld location, ensuring zero gap between the materials being joined, and precise determination of the distance between the joint and the welding head optics.

Verifying laser power

Every laser source has its own accuracy characteristics and specific settings, which can produce discrepancies between the programmed output and the power actually delivered. For that reason, laser power should be measured both before the welding process is set up and periodically throughout production.

Simple industrial power meters are available for this. They work by converting the amount of heat generated by a short pulse into a power value. Using one lets the operator confirm that the power set in the control program corresponds to the power actually reaching the workpiece — and periodic verification confirms that no contamination has appeared in the beam’s optical path.

Speed and geometry: handled by the scanner

In battery welding applications, 2D, 2.5D and 3D scanners are the most common solution, chosen for the precision and welding speeds these processes demand. Built around galvanometer (galvo) drives, these systems offer exceptional precision in terms of velocity stability and geometry reproduction, and they do not require additional monitoring.

Focal position: two problems, not one

The last of the key parameters — the position of the laser beam focal point — actually covers two distinct areas.

The first is measuring the actual position of the workpiece and determining its distance relative to the welding head. This is relatively straightforward: it is a measurement of physical distance between two objects, and the main requirement is using tools accurate enough to deliver the necessary precision and repeatability.

The second is precise determination of the actual distance from the welding head to the laser beam focal point. This task is considerably more complex, because it involves locating the point along the beam axis at which the beam diameter reaches its minimum.

That second problem is where most of the difficulty in setting up a battery welding process is concentrated — and it is exactly what focusfinder.pro is built to solve.

Based on the technical article “RMA Focus Finder — A Reliable Method for Determining the Focal Point of a Single-Mode Laser” by Rajmund Pobereżny, Project Manager, RMA.

Stop guessing the focal point.

focusfinder.pro measures the real focal position of a single-mode laser with accuracy down to 50 µm — engrave, scan, numerical result.

Demo anfragen →